tile.mt

Quotes & installation

How many tiles to order: waste, batches and spares

Measure the surfaces, add a waste allowance that grows with the laying pattern and the tile size, round up to whole boxes, and take every box from one shade and calibre lot. Then keep one box spare.

A finished tile, our own illustration
tile.mt

Ordering tiles is arithmetic, not judgement, right up until the last step. The part that catches people out is not the measuring — it is the waste allowance, the rounding, and the fact that two boxes bearing the same product code can be visibly different tiles.

Measure the surfaces first

For floors, Keope's method is length × width. Where a room is L-shaped or irregular, split it into rectangles, work out each one and add them together.

Keope's worked example: a room measuring 4.30 m × 3.80 m is 16.34 m². A 60×60 cm tile covers 0.36 m². Dividing 16.34 by 0.36 gives 45.39, which rounds up to 46 tiles.

For walls, measure height × width and then subtract doors, windows and built-ins. Keope's example takes a wall of 3.80 m × 2.70 m and subtracts a window of 1.20 m × 1.40 m, leaving 8.58 m² to be tiled.

If you have just bought a shell and the internal walls are not up yet, measure from the drawings and re-measure once the blockwork is in. The arithmetic is the same; only the numbers move.

The waste allowance grows with the pattern

Waste is not a buffer for carelessness. Refin lists what the allowance actually covers: cutting, edge fitting, defects, and breakage in transport or during laying. The more cuts a pattern demands, the more of the material ends up in the skip.

Keope's figures by laying pattern:

Laying patternExtra to add
Straight lay (the most economical)10%
Diagonal15%
Herringbone18-20%

Refin recommends adding 10% to the calculated quantity, and Ceramica.info advises ordering about 10% more than the surface to be tiled. Both agree with Keope's straight-lay figure. Refin also notes that diagonal, herringbone and chevron layouts need more because of the extra trimming and alignment involved, but gives no separate figure for them — Keope's 15% and 18-20% are the only published numbers here.

Keope's worked example: 25 m² plus 10% is 27.5 m², so you order 28 m².

Large formats: a further 5%

For large formats — Keope's examples are 120×120 cm and 120×278 cm — add a further 5% on top of the standard allowance. The reasoning is straightforward: each cut affects more surface, and the precision demands are higher. A mistake on a 120×278 cm slab costs you far more material than the same mistake on a 60×60.

So a herringbone lay in a large format sits at Keope's 18-20% plus 5%. These slabs are increasingly common in new Maltese apartments and refurbished shells, and the allowance is not optional.

Round up to whole boxes

Tiles are sold by the box, not by the square metre, so the final step is to round your figure up to the next whole box. None of the sources publish how many square metres a box holds for a given format — that depends on the product, and you will need the supplier's packing data to do the last bit of the sum. Round up, never down. Rounding down means a top-up order, and a top-up order is where the batch problem starts.

Shade and calibre: what the letters on the box mean

Every box carries a shade code and a calibre.

Shade is the specific tone of a production batch. Refin is blunt about why it exists: perfect colour matching between batches is impossible, because raw materials, kiln temperature and firing conditions all vary. Tiles are therefore sorted by colour uniformity before packaging and given a shade code in letters — shade A, shade B and so on.

Calibre is the tile's precise size. It varies because the material shrinks during firing, so nominally identical tiles from different runs can differ by a fraction of a millimetre.

Both must match for a uniform installation. Ceramica.info makes the same point from the site side: shade and calibre must be uniform across the whole supply, and tiles with different tone or calibre should not be mixed on one surface. Mixed calibres show up as uneven grout lines; mixed shades show up as a patch of floor that looks faintly wrong in afternoon light and cannot be explained away afterwards.

This is why Keope says to buy everything in one purchase for colour consistency, and why Refin says tiles from different production lots can differ in tone, texture or finish even under the same product code. The code on the website is not the same thing as the batch in the warehouse.

Check the delivery before anyone opens a bag of adhesive

Ceramica.info sets out the check to run before laying: confirm the boxes match the order for maker, range, size, colour and quality class.

It also gives the first-choice quality tolerance — first-choice tiles may include no more than 5 defective tiles in every 100. That is a grading standard for what first-choice material is allowed to contain. It is not a breakage rate and it is not a prediction of how many tiles will fail on your job.

If the delivery does contain more than one tone or calibre, Ceramica.info's advice is practical: store them in separate places on site so they do not get mixed. On a Maltese shell with several trades working at once and boxes stacked in whatever room is free, that separation has to be deliberate.

The spare box

Keep leftovers for repairs, says Ceramica.info. Refin puts it more precisely: keeping spares from the same batch makes repairs years later seamless.

A tile cracks. Something heavy is dropped, a leak is chased, a radiator bracket goes in badly. If you have a box from the original shade and calibre lot, the repair disappears. If you do not, you are buying a replacement from a later production run, and Refin has already explained why that will not match. None of the sources state how long a range stays in production, so there is no published answer to whether the tile will even still exist.

One box in the store room is the cheapest form of insurance available on a tiling job.

What this means in Malta and Gozo

The ordering rules are the same everywhere, but the cost of getting them wrong is higher here.

  • Top-up orders are slow and may not match. Ordering short does not just cost a second delivery — it risks a second batch. Build the allowance in at the start.
  • Gozo means a ferry for every delivery. A shortfall discovered mid-job turns into another ferry crossing, with the same batch risk attached.
  • Sicily is a ferry ride away and is often cheaper for the same Italian brands. Within the EU, VAT is paid once in the country of purchase, so a Sicilian purchase is not re-taxed on arrival. But the distance makes a top-up order materially harder, which raises the premium on getting the quantity right first time.
  • Most showrooms in Malta publish no brand list. You usually cannot tell from a website who stocks what. Keope's ranges, for instance, are available in Malta, but few local sites say which brands they carry. Tell us the range and we will get it priced.

When you ask for a quote, give the surface area, the laying pattern and the tile format, and state that every box must come from one shade and calibre lot with a spare box included. Those three facts are what turn a square-metre figure into an order that will still look right in ten years.

Common questions

How much extra should I add for waste?
Keope gives 10% extra for a straight lay, 15% for diagonal and 18-20% for herringbone, with a further 5% on top for large formats such as 120x120 cm and 120x278 cm. Refin and Ceramica.info both recommend around 10% as the general allowance, which matches Keope's straight-lay figure. Refin notes that diagonal, herringbone and chevron layouts need more, but gives no separate percentage.
What do the shade and calibre codes on the box mean?
Shade is the tone of a particular production batch. Refin explains that perfect colour matching between batches is impossible, because raw materials, kiln temperature and firing conditions vary, so tiles are sorted by colour uniformity before packing and given a shade code in letters, such as shade A or shade B. Calibre is the tile's precise size, which varies because the material shrinks during firing. Both must match across your whole supply.
Does ordering everything at once really matter?
Yes. Keope says to buy everything in one purchase for colour consistency, because production batches can differ slightly. Refin makes the same point: tiles from different production lots can differ in tone, texture or finish even under the same product code. A top-up order placed later may arrive in a different shade or calibre.
Is 5 defective tiles in 100 a breakage rate?
No. Ceramica.info gives that as the quality tolerance for first-choice tiles: first-choice material may include no more than 5 defective tiles in every 100. It is a grading standard, not a prediction of how many tiles will arrive broken or be ruined during laying.
Why keep a spare box?
Refin notes that keeping spares from the same batch makes repairs years later seamless, and Ceramica.info advises keeping leftovers for repairs. If a tile cracks after the range has moved on, a replacement bought later is unlikely to match in shade or calibre. A box in the store room is the only guaranteed match you will ever have.

What we could not establish

  • None of the sources publish how many square metres a box contains for a given format, so the final rounding to whole boxes can only be done against the supplier's own packing data.
  • No source states how long a tile range typically stays in production, so there is no published answer to how long a replacement might remain available.
  • No source gives a figure for how many tiles are typically broken in transit; Refin lists transport breakage as one of the things the 10% covers, but does not quantify it.
  • The sources say nothing about whether showrooms in Malta or Sicily will reserve a shade and calibre lot, accept returns of unopened boxes, or hold stock while a shell property is being prepared.
  • No source addresses Maltese construction specifics such as skirting, thresholds or the extra cutting caused by thick masonry reveals.

Sources

  1. Tile calculation: a practical guide for floors and walls — Ceramiche Keope (Concorde Group, Italy) · read 2026-10-05
  2. How many tiles should be ordered? — Refin Ceramiche (Italy) · read 2026-10-05
  3. What is the tile's shade? — Refin Ceramiche (Italy) · read 2026-10-05
  4. From ordering to maintenance (Livio Salvadori) — Ceramica.info (Edi.Cer, Confindustria Ceramica) · read 2026-10-05

Drafted with Claude — claude-opus-5, then read, corrected and approved by Neil Bennett before publication. We do not publish anything a person has not read.

Ready to price it?

One upload goes to every showroom that stocks what you are after, in Malta and Sicily.

Get quotes