tile.mt

Choosing & specifying

Tile adhesive and grout classes: C2TE S1, CG2WA, RG

Adhesive and grout bags carry a short code — C2TE S1, CG2WA, RG. This decodes the letters under EN 12004 and EN 13888 so you can read the bag yourself, and explains when a deformable adhesive or a resin grout is the right call.

A finished tile, our own illustration
tile.mt

Most people buying a property in Malta in shell form never see the adhesive bag. The tiler turns up, the tiles go down, and the only decision anyone asked you about was the colour of the grout. But the two materials holding your floor together are both classified under European standards, and both print the class on the bag. Reading it takes about ten seconds and it is the one check you can perform without being a tiler.

The adhesive code: EN 12004

Mapei sets out the structure. The first letter is the binder:

  • C — cementitious
  • D — ready-mixed dispersion
  • R — reaction resin

The number after it is adhesion performance. Mapei gives the figures: class 1 means adhesion of at least 0.5 N/mm² (5 kg/cm²); class 2, the improved class, means at least 1 N/mm² (10 kg/cm²).

Then the extra letters, as listed by Mapei and restated in the Tile & Stone Journal article written by ARDEX's group training and technical support manager:

LetterMeaning
Ffast setting
Eextended open time
Tnon-slip — reduced slip on walls
Sdeformability, cementitious adhesives only, given as S1 or S2

So Mapei's worked example, C2TE S1, reads: cementitious, improved adhesion, non-slip, extended open time, deformable.

S1 and S2

Deformation classes were added in 2007, according to the ARDEX-authored article. It gives the thresholds: S1 is deformability between 2.5 mm and 5 mm; S2 is above 5 mm. Deformability is the adhesive's capacity to absorb movement between the tile and the substrate rather than transmit it as a crack or a hollow tile.

The temptation is to read S2 as "better than S1" and ask for it everywhere. The same article warns against that: S2 adhesive and unbonded screeds are not suitable for heavily trafficked areas. Its wider point is that adhesive choice should be made case by case after assessing the substrate, and that where a floor is expected to move, uncoupling mats are an option alongside the adhesive specification.

Deformability is the part of the code that tends to matter for larger-format tiles and for work outdoors, where thermal movement is in play. None of the sources here fixes a tile size at which S1 becomes mandatory, and we are not going to invent one — see the gaps list.

Real products, real codes

Mapei publishes the classes of its own adhesives, which is useful for seeing how the letters combine in practice:

  • Granirapid — C2F S1
  • Kerabond + Isolastic — C2E S2
  • Ultralite S1 — C2TE S1
  • Keralastic T — R2T
  • Ultramastic 3 — D2T
  • Elastorapid — C2TEF S2

Note Keralastic T: a reaction-resin adhesive carries no S class, because deformability under EN 12004 is a cementitious-only classification.

The bag check

The Tile Association's tiling guide gives the simplest test a homeowner can apply. A quality adhesive should carry a classification on the packaging (its example is C1TE), a CE mark and a reference to EN 12004. Low-performance adhesives, it says, tend to omit the classification altogether. If the bags stacked in your shell have no class printed on them, that absence is the finding.

The grout code: EN 13888

Grout runs on a separate standard. Both The Tile Association and the ATLAS product guide set out the same three classes:

  • CG1 — normal cementitious grout
  • CG2 — cementitious grout, improved performance
  • RG — reaction-resin grout

CG2 carries two optional suffixes, which is where CG2 WA comes from: W for reduced water absorption, A for higher abrasion resistance. ATLAS states that all its own cementitious grouts are classed CG2 WA.

ATLAS prints the requirement table. Reproduced as published:

RequirementCG1CG2RG
Abrasion resistance≤ 2,000 mm³≤ 1,000 mm³≤ 250 mm³
Flexural strength≥ 3.5 N/mm²≥ 3.5 N/mm²≥ 30 N/mm²
Compressive strength≥ 15 N/mm²≥ 15 N/mm²≥ 45 N/mm²
Shrinkage≤ 2 mm/m≤ 2 mm/m≤ 1.5 mm/m
Water absorption after 30 min≤ 5 g≤ 2 g—
Water absorption after 240 min≤ 10 g≤ 5 g≤ 0.1 g

The 240-minute water absorption row is the one to look at twice. CG2 allows up to 5 g; RG allows up to 0.1 g. That gap is the whole argument for resin grout in a shower, around a kitchen worktop, in a pool surround — and in any room where the joints are pale, because a joint that absorbs little absorbs little staining.

What RG costs you in handling

Resin grout is a more specialised product, not a drop-in substitute. ATLAS publishes the working constraints for its own epoxy grout: pot life 45 minutes, foot traffic after 24 hours, full load and full chemical resistance after 7 days, joint widths 1–10 mm, and application at 10–25 °C. A 45-minute pot life changes how a tiler works a room, and the 10–25 °C window is worth a thought in a Maltese July if the shell has no shading.

The Tile Association's framing is the sensible one: grout choice depends on tile type, location, service conditions and colour. A CG2 WA grout already clears the improved thresholds on both water absorption and abrasion. Whether the step up to RG is worth it is a room-by-room question, not a whole-house one.

Hybrids

Kerakoll, in content it supplied to Tile & Stone Journal, describes Fugabella Color as a hybrid resin-cement grout with performance close to epoxy grouts, in 50 colours, for interior and exterior use. It describes Fugalite Bio as an RG grout based on a water-based resin — hypoallergenic in dermatological tests, UV resistant, stain proof, waterproof and bacteriostatic, in 24 colours of which 12 are designed for wood-effect tiles. These are the manufacturer's own descriptions, not independent test results, and should be read as such.

How this plays out in Malta

Adhesive and grout are usually the tiler's purchase, not yours, and in a shell-form buy they rarely appear on the quote as a line with a class attached. Three practical points:

  1. Ask which brands your showroom or tiler works with. Most Maltese showrooms publish no brand list online. We could not verify a single Maltese stockist of any of the brands named above on a supplier's own website, so this article names none. Ask, and ask to see a bag.
  2. Specify by class, not by brand name. "C2TE S1 adhesive and a CG2 WA grout, RG in the shower" is a sentence a tiler can price and a supplier can match. "Good adhesive" is not.
  3. Buying in Sicily is a different calculation for sundries than for tiles. Sicily is a ferry ride away and often cheaper for the same Italian brands, and within the EU VAT is paid once in the country of purchase — but adhesive and grout are heavy, low-value-per-kilo goods, and whoever lays them usually wants to buy them. If the property is in Gozo, remember every delivery means a ferry, sundries included.

The classes are not a hierarchy to climb. They are a vocabulary, and the useful version of this knowledge is being able to look at a pallet in your own shell and tell whether the bags say anything at all.

Common questions

What does C2TE S1 actually mean?
Reading it left to right: C is a cementitious adhesive, 2 is improved adhesion, T is non-slip (reduced slip on walls), E is extended open time and S1 is the first deformability class. Mapei gives exactly this decoding, and the ARDEX-authored article in Tile & Stone Journal restates the same lettering.
Is a more expensive adhesive always better?
The classes are not a quality ranking you climb. The ARDEX-authored Tile & Stone Journal article says adhesive choice should be made case by case after assessing the substrate, and notes that S2 adhesive and unbonded screeds are not suitable for heavily trafficked areas. A higher letter count is not automatically the right specification.
Do I need epoxy (RG) grout, or is CG2WA enough?
Per the ATLAS product guide, RG grout tests far harder than cementitious: abrasion resistance ≤ 250 mm³ against ≤ 1,000 mm³ for CG2, and water absorption after 240 minutes ≤ 0.1 g against ≤ 5 g for CG2. That matters for showers, kitchens, pools and pale joints. An improved cementitious grout classed CG2 WA already carries reduced water absorption (W) and higher abrasion resistance (A). RG is a more specialised product to buy and to lay.
How do I tell a cheap adhesive from a classified one?
The Tile Association says quality adhesives carry a classification on the packaging (its example is C1TE), a CE mark and a reference to EN 12004, and that low-performance adhesives tend to omit the classification. If the bag has no class on it, that is itself the answer.
Which Maltese showrooms stock Mapei, Kerakoll or Ardex?
We could not verify that on any Malta supplier's own website, so this article names none. Most Maltese showrooms publish no brand list at all. Ask your showroom or your tiler which adhesive and grout brands they work with, and ask to see the bag.

What we could not establish

  • No source states which adhesive or grout brands are stocked in Malta or Sicily. Most Maltese showrooms publish no brand list, and we verified no stockist on a supplier's own site.
  • No source gives a price, a price difference, or a cost per square metre for any adhesive or grout class — including how much more RG grout costs than CG2.
  • No source in this set states a tile size above which a deformable (S1 or S2) adhesive becomes necessary. The ARDEX-authored article says the decision is case by case after assessing the substrate.
  • No source gives coverage or consumption figures (kg per m²) for any class, so you cannot calculate quantities from this article.
  • No source covers Maltese climate conditions, external terraces or underfloor heating specifically; outdoor specification is a separate question with its own guidance.
  • The Kerakoll performance descriptions are manufacturer-supplied content in Tile & Stone Journal, not independent test results.

Sources

  1. Which adhesive should I use? — Mapei (Italy) · read 2026-10-05
  2. Understanding tile adhesive classifications including S1 or S2 deformation (Rob Thorp, ARDEX) — Tile & Stone Journal (article by ARDEX Group UK technical staff) · read 2026-10-05
  3. Grouts, silicones, finishing trims — product guide (grout classification) — ATLAS (building chemicals maker, Poland) · read 2026-10-05
  4. Kerakoll's naturally good grouts — Tile & Stone Journal (Kerakoll-supplied content) · read 2026-10-05
  5. Tiling Guide — adhesives and grouts (page 9) — The Tile Association (UK) · read 2026-10-05

Drafted with Claude — claude-opus-5, then read, corrected and approved by Neil Bennett before publication. We do not publish anything a person has not read.

Ready to price it?

One upload goes to every showroom that stocks what you are after, in Malta and Sicily.

Get quotes